R2-Blade v1.5.6.24 Alpha  Thursday, 26 April 2012 26-04-2012 MT-Box Release notes: Added support for new MT box series Added support for new models and firmware's Fixed some minor bugs New models: Bird: F200 S160 S168 S701 MTN-m191 Huawei: T156 new G1157 G1158FM Sagem: My231BT Download MT_R2_Blade_v1.5.6.24_Alpha.exe

MTB NK 2.42.2 - Nokia Infineon X-Gold unlock supported  Monday, 13 February 2012 What's new: Added support for FBUS read X-Gold models all rootkey hash versions Unlock supported using GT server and LBF (local brute force) LBF read out is free for all MT box cutsomers Supported phones: 1280 - RM-647 1616-2b - RH-126 1616-2c - RH-129 1616 - RH-125 1800 - RM-653 Please note: To use MTB NK v2.42.2 you need to have installed MTB NK 2.38.6 setup After software installation do not forget to update your MT Box using MT Box update tool v3.24 Download MTB_NK_v2.42.2.zip Download mtb_nk_setup2_38_6.exe

MTB NK 2.42.1 - Bug fix  Tuesday, 7 February 2012 What's new: Fixed sending unlock code to sl3 phones. Please note: To use MTB NK v2.42.1 you need to have installed MTB NK 2.38.6 setup After software installation do not forget to update your MT Box using MT Box update tool v3.24 Download mtb_nk_setup2_38_6.exe Download MTB_NK_v2.42.1.zip

MTB NK 2.42 - Nokia Infinieon unlock supported  Monday, 6 February 2012 What's new: Added support for USB read Infineon models all rootkey hash versions Added flash support for Infineon based phones Unlock supported using GT server and LBF (local brute force) LBF read out is free for all MT box cutsomers Supported phones: Asha 200 RM-761 Asha 200 RM-762 C1-01 RM-607 C1-01 RM-608 C1-02 RM-643 C1-02 RM-644 C2-00 RM-704 C2-02 RM-692 C2-02 RM-693 C2-05 RM-724 C2-05 RM-725 C2-03 RM-702 C2-06 RM-702 C2-07 RM-692 C2-08 RM-702 X2-02 RM-694 X2-05 RM-772 Please note: To use MTB NK v2.42 you need to have installed MTB NK 2.38.6 setup After software installation do not forget to update your MT Box using MT Box update tool v3.24 Download mtb_nk_setup2_38_6.exe Download MTB_NK_v2.42.zip

MTB NK 2.41 - Nokia Broadcom unlock supported  Tuesday, 22 November 2011 What's new: Added support for USB read Broadcom models all rootkey hash versions Unlock supported using GT server and LBF (local brute force) Supported imei backup and SX4 repair Unlock using GT SL3 server cost 40 credits Cancel SL3 brute force for Broadcom models will require 5 credits per phone Supported phones: C3-00 RM-614 X2-00 RM-618 X2-01 RM-709 X2-03 RM-709 X2-01.1 RM-717 2710c RM-586 7020 RM-497 Please note: To use MTB NK v2.41 you need to have installed MTB NK 2.38.6 setup After software installation do not forget to update your MT Box using MT Box update tool v3.24 This is BETA release so please if you found any bug report to us Download link Alt Download link

MTB NK 2.40 beta - Nokia RAPUv21 supported  Friday, 14 October 2011 What's new: Added support for USB read of EFUSE for RAPUv21, RAPU all rootkey hash versions Unlock supported using GT server and LBF (local brute force) Supported imei backup and SX4 repair Flash already supported in previous version Some SL3 server side changes (to be ready for emergency situations) Supported phones: Nokia 500 - RM-750 Nokia 600 - RM-701 Nokia 700 - RM-670 Nokia 701 - RM-744 Please note: To use MTB NK v2.40 you need to have installed MTB NK 2.38.6 setup After software installation do not forget to update your MT Box using MT Box update tool v3.24 This is BETA release so please if you found any bug report to us Download Link Alt Download Link

MTB NK v2.39.1  Friday, 16 September 2011 What's new: - Nokia egold platform flash over FBUS supported - Fixed some bugs in communication Please note: To use MTB NK v2.39.1 you need to have installed MTB NK 2.38.6 setup MTB_NK_v2.39.1.zip MTB_NK_v2.39.1.zip

MTB NK v2.38.7  Saturday, 6 August 2011 What's new: - Fixed rapido flashing over FBUS - Fixed serial communication over FBUS ( fixes problem where on some hubs box will hang when doing serial communication) Please note: Is not possible to upload phones with older MTB NK version then 2.38.5. You need to download and use latest MTB NK software (server message: e/155/please download latest software; ) To use MTB NK v2.38.7 you need to have installed MTB NK 2.38.6 setup MTB_NK v2.38.7.zip MTB_NK v2.38.7.zip

MTB NK v2.38.6 setup  Monday, 25 July 2011 What's new: - Fixed hang when doing serial communication/unlock DCT4 - Fixed crash when doing boot info for DCT4 Please note: Is not possible to upload phones with older MTB NK version then 2.38.5. You need to download and use latest MTB NK software (server message: e/155/please download latest software; ) mtb_nk_setup2_38_6.exe mtb_nk_setup2_38_6.exe

MT Box Local Brute Force Shell v0.5  Tuesday, 19 July 2011 What's new in SL3 LBF Shell v0.5: - Added ighashgpu to HashCat file format convertor - Some bugs fixed How to use convertor: - Start Shell software v0.5 - Download from GT server data for LBF ( data is ighashgpu format) - Add to first line downloaded command from GT server - If you like to convert ighashgpu to HashCat command format (for those who use HashCat without Shell software) click to "ighashgpu 2 HashCat" button. - Software will make imei.bat file in same folder Note: You need to have in same folder HashCat and shell installed, then shell will make compatible bat file for that version of HashCat. Download link 1 Download link 2

MTB NK v2.38.5  Wednesday, 13 July 2011 What's new: - Fixed small mistake in message for SL3 upload for 20 digits code phones - Added MTB NK version check on server side related to 20 digits code phones - Disabled server access for all older version of MTB NK then 2.38.5 Please note: Is not possible to upload phones with old MTB NK version. You need to use only latest MTB NK 2.38.5 or higher version of MTB NK (server message: e/155/please download latest software; ) To able use MTB NK v2.38.5 you need to have installed latest MTB NK v2.383. fixed setup MTB_NK_v2.38.5.zip MTB_NK_v2.38.5.zip

MTB NK v2.38.4  Wednesday, 6 July 2011 What's new: - Fixed USB reading for Rapido phones. Please note: To able use MTB NK v2.38.4 you need to have installed latest MTB NK v2.38.3 fixed setup Download link 1 Download link 2

MTB NK 2.38.3 fixed USBTest_sys setup  Tuesday, 28 June 2011 What's new: - Fixed problem with USB Test sys file We are sorry for caused problem Download link 1 Download link 2

MTB NK 2.38.3 setup - SL3 over USB supported  Monday, 27 June 2011 What's new: - Unlock over USB for SL3 phones for: Rapido, RapuYama, Rap3v4 - USB read for RPL on RapuYama, Rap3v4 ( certificates, simlock, sx4 (generate if doesn't exist), wmdrm, cmla) - ( ReadImeiBackup button ) Notes on RPL functionality: On USB full support for rapido is also available, but works on some of the models ( like n97) and is unstable or doesn't work on others ( for certificate read) Writing through USB: for certificates works fine on RAPU, RAP3V4, works on some rapido (n97) For serial commands works ok if length of command is small For large data FBUS needs to be used because Nokia software ( either driver or phone) blocks when it receive large command We strongly recommend if the phone will be erased after backup, first try to write the RPL to make sure all data was backed up ok, and then erase. Please note: Effectively if SX4 is damaged in order to repair it, one must make backup of RPL and then send the backup to phone using 'Write RPL BB5'. After that MT will be able to authorize sx4. Download MTB NK 2.38.3 setup Download Link 1 Download Link 2

MTB NK 2.37.3 - SL3 USB unlock support added  Thursday, 19 May 2011 What's new: - SL3 USB read support for RapuYama phones How to read phone using USB cable: - Power on the phone - Connect USB cable to phone - Select OVI suite or PC suite mode - Please wait to driver installation finish - Select USB mode in MTB NK software - Press Phone info button - If communication is ok, go to SL3 BForce tab - Press Read button More MT Box features to come very fast Download Link 1 Download Link 2

MTB NK v2.37.2  Monday, 16 May 2011 16.05.2011 - What's new: - RPL fix for small lock definitions - RAP3v4 SL phones unlock supported via server or LBF: - 3710a-1 (RM-509) - 3710a-1b (RM-510) - 3711a-1 (RM-511) - 6303ci (RM-638) - 7230 (RM-604) - X3-00 (RM-540) - X5-01 (RM-627) USB read for SL3 phones will be ready for 1-3 days. Download link 1 Download link 2

MT Box Local Brute Force Shell v0.3  Thursday, 5 May 2011 What's new in SL3 LBF Shell v0.3: • Support for HashCat LBF software • Now supports both LBF software ighashgpu and HashCat • Supports ATI 6xxx cards, Dual GPU cards, Nvidia cards etc) • Support for LBF under Windows 32, Windows 64, Linux 32 and Linux 64 • Support for start, stop and resume LBF job • Support to add more jobs in queue. So you don’t need to be with PC all the time to add new jobs. • When one job done next will be automatically started. • You can remove jobs from queue in single click • Can create LBF job list, and load it at any time How to Start New Job: 1. Download and install SL3 LBF Shell software 2. Start MTB NK 2.37.1 or higher version 3. Go to SL3 BF compute tab 4. Upload phone to SL3 server using "Read" button in SL3 BF compute tab 5. Cancel phone from calculation queue, double click on phone imei in SL3 BF tab 6. Start MT tool v3.21 or higher version 7. Press "Download Zone" button 8. New browser window appears. We recommend to use Mozilla Firefox or Google Chrome as your default browser. 9. In "SL3 Service" tab click on "Get BF data" then insert imei from canceled phone 10. Press "Get Data" button. 11. You will get necessary data for SL3 LBF Shell software. 12. COPY and SAVE BF data for example: "ighashgpu -t:sha1 -salt:003542250374556200 -h:F8B4D8D05E7C71A7EAB8B12B6FF0B8EBB2B19DDD -uh:00010203040506070809 -min:15 -max:15" 14. Start SL3 LBF Shell v0.3 software and paste in first software line (command line) 13. Press Start New Job button 14. Software start to work 15. You can see remaining average time to get code. Calculation time depend from cards you use 16. Please wait to software finish 17. When software finish copy all digits after word Found: 18. Login again via MT tool by pressing "Download Zone" button 19. Go to SL3 service than click "Get Code" 20. Enter calculated data (result from SL3 LBF Shell software) 15 bytes and imei. 21. If all is ok you will get unlock code for this IMEI How to Stop Job: 1. If you click on Stop Job please wait to software finish already started part of calculation and write results in log file (*bf_job file). All files are saved to SL3 LBF Shell software folder in format "your_phone_imei.bf_job". How to Resume Job: 1. Start SL3 LBF software then click on Resume Job button 2. Software will ask you for bf_job file 3. Select desired job file and wait to software continue job Please note: • Windows 7 or Vista users must RUN software as Administrator. Because of some Windows rigid security restrictions. If not work install software outside Program Files folder. • ighashgpu and HashCat CANT be in same folder when you try to use LBF Shell! • SL3 LBF Shell and ighashgpu.exe must be in same folder OR SL3 LBF Shell and HashCat must be in same folder. • To able use SL3 Local Brute Force service you need to have minimum 50 credits on your MT Box account • All support questions regarding SL3 Local Brute Force (hardware requirements etc….) need to be posted in dedicated forum section SL3 Local Brute Force - LBF Download: SL3 LBF Shell v0.3 SL3 LBF Shell v0.3 - Rapid Share SL3 LBF Shell v.03 - Mega Upload SL3 LBF Shell v0.3 - Media Fire SL3 LBF Shell v0.3 - Hot File Third party software you can download from their developer sites: ighashgpu HashCat 7zip - need it to unpack HashCat software Please note: You must agree ighashgpu, HashCat and 7zip software license before use it.

MTB NK 2.37.1 - Bugs fix version  Wednesday, 27 April 2011 What's new: - FBUS flashing fixed for RAP3 phones with original flashing algorithm - SL20 RPL fixed for rapido phones Download link 1 Download link 2

MTB NK 2.37  Tuesday, 5 April 2011 What's new: - SL3 unlock support extended with many new models. - All HASH supported for listed models. Phone hash does not important anymore. - Backup and restore certificates over USB added Price for unlock is 50 MT Box credits for all models. Unlock for all phones is supported using FBUS cables with TX2 only. Also enable in MT Box extras Use TX2 line. There is a list of all supported models with MT Box: - 2690 ¨C RM-635 - 2700c, 2700c-2 ¨C RM-561 - 2730c-1, 2730c ¨C RM-578 - 2730c-1b ¨C RM-579 - 3600s ¨C RM-352 - 3720c ¨C RM-518 - 3720c-2 ¨C RM-518 - 5130, 5130c-2 ¨C RM-495 - 5130c-2 ¨C RM-496 - 5228, 5230, 5232, 5233 ¨C RM-588/593/594/625/629 - 5310 Xpress Music ¨C RM-303 - 5530 ¨C RM-504 - 5630 Xpress Music ¨C RM-431 - 5630d-1 ¨C RM-431 - 5730s-1 Xpress Music ¨C RM-465 - 5800d ¨C RM-356/428 - 6120c ¨C RM-243 - 6300 ¨C RM-217 - 6303c ¨C RM-443 - 6500c ¨C RM-265 - 6500s-1 ¨C RM-240 - 6700c-1, 6700c ¨C RM-470 - 6700s ¨C RM-576 - 6710s navigator ¨C RM-491 - 6720c ¨C RM-424 - 6730c-1 ¨C RM-547 - 6750 Mural ¨C RM-381 - 6760s ¨C RM-573 - 6790s ¨C RM-492/599 - 7210c, 7212c ¨C RM-436 - C3-01 - RM-640 - C5-00 ¨C RM-645 - C5-03 ¨C RM-697 - C6-00 ¨C RM-612/624 - C6-01 ¨C RM-601/718 - C7-00 ¨C RM-675 - E5-00 ¨C RM-632 - E52-1 ¨C RM-469 - E55-1 ¨C RM-482 - E63 ¨C RM-437/450 - E66 ¨C RM-343/345/420/494 - E71 ¨C RM-346/347/357/407/493 - E72-1 ¨C RM-530 - E72-2 ¨C RM-529 - E73 ¨C RM-658 - N8-00 ¨C RM-596 - N86 ¨C RM-484/485/486 - N97 ¨C RM-505/506/507 - N97-4 mini ¨C RM-555 - N97-5 ¨C RM-553 - X3-02 ¨C RM-639 - X5-01 ¨C RM-627 - X6-00 ¨C RM-551/559 Note: Rap3v4 models to be supported during this week. Downlink link 1 Downlink link 2

MT Box update tool v3.21  Thursday, 27 January 2011 What's new in MT tool v3.21: - Fixed bug " Can't Connect to Server.123 " Download MT Tool v3.21

MTB NK v2.36.4  Monday, 24 January 2011 What's new in MTB NK v2.36.4: - Fixed RPL support for 'New Generation' loaders ( Rapido and Rapu Yama phones) Please note: To use MTB NK v2.36.4 you need to have MTB NK 2.36.3 setup installed already. Using SL3 RPL service you can: - Repair imei 123456654321? - Repair SimLock data Failed Read...(Contact Service) - Repair Superdongle Key - phone turn off in 3-10 minutes, - Repair APE data on smartphones - Nokia logo long time How to use SL3 ASK to RPL service: - Download and install MTB NK 2.36.4 exe - Start MTB NK 2.36.4 - Go to server tab and click on Delete button - Click on Save button and enter login details: user name - boxlogin, password: boxlogin - Connect phone to FBUS cable - Go to Extras - Imei / ESN repair - Press BB5 ASK BB5 button - Software starts to boot the phone and will ask you: Would you like to send ASK to server? Cost is 80 credits! - If you want to send ASK file to server press Yes button. 80 MT Box credits will be deducted from your MT box account only once per phone imei. - If you does not want to send ASK file to server press NO. How to check it is your RPL file ready: - Start MTB NK 2.36.4 - Connect phone to FBUS cable - Go to Extras - Imei / ESN repair - Press BB5 ASK BB5 button - Software starts to boot the phone and will ask you: Would you like to send ASK to server. Cost is 80 credits! - Press YES button. - Software will NOT deduct 80 credits from your account. - Also you can check does your RPL file is ready without any credits on your MT Box account. - If your RPL file is ready software will download it and write to phone automatically. Important information about SL3 RPL service: - SL3 ASK to RPL service cost 80 MT Box credits per phone - Time for SL3 RPL calculation is up to 72 hours - Once uploaded ASK file cant be canceled from calculation Please note: Posting ASK or RPL files, PHONE IMEI and PUBLIC ID on forums are STRONGLY PROHIBITED. So please when post about your problem edit last 6 digits from phone imei, delete PUBLIC ID (RAP) from log file before post it. Breaking this rule will cause your support account closed and MT Box blocked for all services. RPL files are calculated files and there CANT be any mistake in. Once again do not upload ASK or RPL file to forum, PHONE IMEI and PUBLIC ID. Download mtb_nk_setup2_36_3.exe Link 1 Link 2 Download http://ul.to/tjlf6p/MTB_NK_2_36_4.ZIP Link 1 Link 2

SL3 RPL service - MTB NK v2.36.3 - MT Tool v3.20 beta  Thursday, 20 January 2011 What's new in MTB NK v2.36.3 setup: - SL3 RPL service started. Repair bad imei 123456789xxxxxxxx on all SL3 phones now is available. The phone will be restored to its factory state. - Automatically add installed data packages to models list, even if not existing in phoenix.ini ( will not show phone public name ). - Refined search for model ( bug when search for RM-5 and it find RM-540 instead ). It still does it wrong if one types 'RM-5' in combo and press 'Enter'. This can't be fixed as it is automatically done by Windows. But if after typing 'RM-5' one presses 'Down arrow' MT will use different search algorithm and correctly find 2300. - Added support for Life Timer reset on new models (x2, x3-02...) Note: in order for the changes to take effect, phone needs to be restarted after operation, of factory default settings to be executed. - Improved 'Update' button in SL3 BForce compute. Now will show already computed codes (unlocked). - Added common folder for Dynamic Camera config. Some users don't install full versions of flash, so they can't configure the camera after flash. To solve this, MT will look for support files in product folder, if it doesn't find, it will also look in 'camconfig' folder, where a collection of camera configuration files is stored. - MT tool v3.20 Using SL3 RPL service you can: - Repair imei 123456654321? - Repair SimLock data Failed Read...(Contact Service) - Repair Superdongle Key - phone turn off in 3-10 minutes, - Repair APE data on smartphones - Nokia logo long time How to use SL3 ASK to RPL service: - Download and install MTB NK 2.36.3 exe - Start MTB NK 2.36.3 - Go to server tab and click on Delete button - Click on Save button and enter login details: user name - boxlogin, password: boxlogin - Connect phone to FBUS cable - Go to Extras - Imei / ESN repair - Press BB5 ASK BB5 button - Software starts to boot the phone and will ask you: Would you like to send ASK to server? Cost is 80 credits! - If you want to send ASK file to server press Yes button. 80 MT Box credits will be deducted from your MT box account only once per phone imei. - If you does not want to send ASK file to server press NO. How to check it is your RPL file ready: - Start MTB NK 2.36.3 - Connect phone to FBUS cable - Go to Extras - Imei / ESN repair - Press BB5 ASK BB5 button - Software starts to boot the phone and will ask you: Would you like to send ASK to server. Cost is 80 credits! - Press YES button. - Software will NOT deduct 80 credits from your account. - Also you can check does your RPL file is ready without any credits on your MT Box account. - If your RPL file is ready software will download it and write to phone automatically. Important information about SL3 RPL service: - SL3 ASK to RPL service cost 80 MT Box credits per phone - Time for SL3 RPL calculation is up to 72 hours - Once uploaded ASK file cant be canceled from calculation Please note: Posting ASK or RPL files, PHONE IMEI and PUBLIC ID on forums are STRONGLY PROHIBITED. So please when post about your problem edit last 6 digits from phone imei, delete PUBLIC ID (RAP) from log file before post it. Breaking this rule will cause your support account closed and MT Box blocked for all services. RPL files are calculated files and there CANT be any mistake in. Once again do not upload ASK or RPL file to forum, PHONE IMEI and PUBLIC ID. What's new in MT tool v3.20 beta: - Fixed bug " Can't Connect to Server.123 " - Added new button " Box Stats " Now you can see: - Your box update history - MT box credits information - Available services for your MT Box - SL3 service status - All your unlocked SL3 phones with codes and used credits - All used services on MT server with prices and time - Box credits recharge history First run of "Box Stats" will open your default browser window and ask you to register with your name and email address. After registration validation link will be sent to email address you enter upon registration process. Please to all who use Yahoo, Hotmail, Gmail and other free email services check your Spam or Junk folder if no validation link received in 10 minutes. Recommended browsers all except Internet Explorer (because of their rigid security settings) Download MT_Box_update_tool_v3.20_beta.exe.zip (81 Kb) Download MTB_NK_2_36_3 Download link 1 Download link 2 Download mtb_nk_setup2_36_3 Download link 1 Download link 2

MTB NK v2.36.1  Monday, 10 January 2011 What's new in MTB NK v2.36.1: - SL20 RPL procedure fixed - RAP3 SL3 read fixed - Added detect whether TX2 line was connected when rebuilding Certificates ( RPL write) - Increased Erase timeout, hoping to solve problems with 6303ci flash over USB Download I Link 1 Link 2 Download II Link 1 Link 2

MTB NK v2.36 - MT Tool v3.19  Monday, 20 December 2010 Update season has been started! What's new in MTB NK v2.36: - Read Ask DCT4 and auto send to server for computation - RSA Forgery when SimLock damaged (fffff) - USB Flash E71 and the likes - Dynamic camera config after flash (option in Automatic actions when flashing) - Broadcomm USB flashing (tested on x2) - Certificate backup when possible through USB ( X2) - N73 FBUS flashing ( blank display after flash) - USB flashing of 5130 ( phones are too slow in erase and had to increase timeout for erase) - New flash loaders - Added new MT Box update tool v3.19 - Added support for MT Box with serial number 4xxxxxxxxx (Error: "Unable to locate the MT-box interface") To be added in next days: - Many USB features (Certificate backup and restore... etc) Expect more HOT news very soon. Best Regards Griffin Team Download Link 1 Download Link 2

SL3 unlock price changes  Thursday, 12 August 2010 Dear customers, We want to inform you about SL3 unlock price changes For all uploaded phones from now unlock price is 60 MT Box credits per phone This mean unlock per phone can cost you from 24 - 30 euro (31 - 39 usd) Price for unlock depend from credit quantity you buy. Now you can download code from SL3 server even you have 0 credits on your MT Box account Why GT SL3 server? There is not hidden calculation time, you can check it before upload phone The calculation time cant be longer then server shows you in moment you upload phone. Only can be less then this! You can always cancel the calculation for any phone you have uploaded Servers are up and running 24 hours per day, There is no server downtime We constantly extend and optimize our SL3 data center (today we run 4th part) Because maximum time to calculate code is 01:11:41 ( 1 hour : 11 minutes : 41 seconds)

MT Box Nokia - MTB NK 2.35.3 SL3  Thursday, 5 August 2010 What's new in MTB NK v2.35.3 SL3: Added "SL3 Bforce compute" tab There is 3 buttons in SL3 Bforce tab: Read, Update and Write: Read - Read phone and send data to SL3 server Update - Check how many time need wait for code Write - Enter unlock code directly to phone - No need to enter code manually Supported ROOT_KEY_HASH ( RAP ) for unlock: 38F312750F686F9FC9B1B3778774A195 9A28E119033B91D14D22838C86D0D53C 9DDBFCFE6E73CED7D8C6268C8EB85723 A5404AE83A594ECADEE532F0C236BFA6 BAF3A9C3DBFA8454937DB77F2B8852B1 CAEEBB65D3C48E6DC73B49DC5063A2EE E9EFF4BFAA5393217CA6B17755FC3E14 F2D76DFAFD66C7F195F278417DF05888 F682624FFB08F6D955DBE7D9C0485084 FCB5C510AF7F09F313D9BDE85A707CC0 Phone model does not mater, just check ROOT_KEY_HASH and Do It How to check ROOT KEY HASH: Start MTB NK v2.35.3 SL3 and press OK button Download Link 1 Download Link 2

Nokia SL3 unlock server extended  Thursday, 17 June 2010 Dear customers, We have extended and optimize our SL3 unlock server, so now we can allow access for more customers, but again we have limited resources. At the moment there is two ways to got access to SL3 server: When we have some free slot Instant access for all who have 1000 credits on MT Box account In both ways you need to apply using online form on our web page: SL3 unlock server access request form When fill the form please include all requested details. 1. If you does not have 1000 credits on your MT Box account we will add you to waiting list and when some free slot on SL3 server will contact you by email. 2. We will check your MT Box account and if you have 1000 credits on it your access will be instantly approved. Please load to your MT Box account 1000 credits before apply. About SL3 unlock: Unlock solution is by generated codes so you can enter codes by keyboard or by cable All models supported (with supported HASH) All network operators supported Unlock price is 80 MT Box credits per phone In order to use SL3 server your MT Box must have SL20 module activated Supported models at the moment: - 2700 Classic (RM-561) - 2730 Classic (RM-578) - 2730c-1b (RM-579) - 2690c (RM-635) - 3600 Slide (RM-352) v56.26 - v57.23 - 3720 Classic (RM-518) - 5130 XpressMusic (RM-495) - 5310 XpressMusic (RM-303) v58.58 - v59.42 - 5730s (RM-465) - 6300 (RM-217) v57.20 - 6303 Classic (RM-443) - 6500 Slide (RM-240) v59.60 - 6500 Classic (RM-265) v59.45 - N97 (RM-505/506/507) - N97mini (RM-555) And many other models not listed here, just check ROOT KEY HASH and if is supported Just Do It Supported ROOT_KEY_HASH( RAP ): - CAEEBB65D3C48E6DC73B49DC5063A2EE - 9DDBFCFE6E73CED7D8C6268C8EB85723

MT Motomagx v1.1a - IMEI change release  Monday, 10 May 2010 Release notes: Added imei change for Motorola phones User manual updated with imei change details Added MT Box update tool v3.18 Download Link 1 Download Link 2

MT Box Nokia - MTB NK v2.35.1  Tuesday, 20 April 2010 Release note: Fixed bug with Rapido phones from previous version ------------------------------------------------------ SL20 module activation grants you: Free unlock for all SL20 supported phones Free SD repair for all supported BB5 phones Free unlock for all DCT4+ supported phones Free unlock for new DCT4+ 1202, 1661, 1662, 5030 etc Free SP data repair on all DCT4+ phones How to use free DCT4+ unlock if SL 20 module activated on your box: In MTB NK software in server tab enter login details: User name: boxlogin Password: boxlogin Download Here Mtb_nk 2.35.1 require_2.34_beta_full_setup.exe setup Download Here Mtb_nk 2.34 full setup OR Download Here Mtb_nk 2.35.1 require_2.34_beta_full_setup.exe setup Download Link 1 - Mtb_nk 2.34 full setup Download Link 2 - Mtb_nk 2.34 full setup

MT Box update tool v3.18  Monday, 19 April 2010 Release notes: MT Box update tool allows you to: * To read your MT Box information * To check what module your box has activated * To activate available MT Box modules - * To read your ˇ°Box Accountˇ± credits information - * Update your MT Box to latest available version * To use your MT Box as ˇ°PKD-1 dongleˇ± ¨C Nokia service device and run ˇ°Phoenixˇ± ¨C Nokia service software * To go to GT support forum * Login to GT support * To read your MT Box serial number ¨C MT Box sn * To read how many times each MT Box software is started * To reset your MT Box name to default Download Link 1 - MT-Box MT-Tool 3.18 Download Link 2 - MT-Box MT-Tool 3.18

1202, 1661, 1662, 5030 Free unlock for all SL20 activated MT box  Thursday, 15 April 2010 Release note: Free DCT4+ all models unlock for MT Box users who have SL20 module activated To unlock DCT4+ phones please use Unlock button No more patch files Does no need to worry about firmware or UPP version Phones are factory unlocked Phones can be flashed after unlock without to goes to CS Phones can be locked to any network If your box has no SL20 module activated software will automatically offer you to start MT Box update tool and activate it in just few seconds Unlock process is offline Can use FBUS or Easy cable MT tool v3.18 with small bug fix SL20 module activation grants you: Free unlock for all SL20 supported phones Free SD repair for all supported BB5 phones Free unlock for all DCT4+ supported phones Free unlock for new DCT4+ 1202, 1661, 1662, 5030 etc Free SP data repair on all DCT4+ phones How to use free DCT4+ unlock if SL 20 module activated on your box: In MTB NK software in server tab enter login details: User name: boxlogin Password: boxlogin Download link 1 for mtb_nk_2_35_require_2.34_beta_full_setup.exe Download link 2 for mtb_nk_2_35_require_2.34_beta_full_setup.exe Download link 1 for MTB_Nk2.34-2.35.rar Download link 2 for MTB_Nk2.34-2.35.rar

MT Box Nokia - MT Box DCT4+ patch files update v2.1  Friday, 9 April 2010 Release notes: New supported models and versions for DCT4+ patch unlock: 1680c RM-394 - v5.61 7100s RM-438 - v6.32 Added patch files for the following DCT4+ versions: V_05_61_18_04_08_RM_394__c__Nokia.flp V_06_32_07_05_09_RM_438__c__Nokia.flp Please note: This patch update contain all new + all previously added patch files Download Link 1 Download Link 2

MT Box update tool v3.17  Thursday, 25 March 2010 Release notes: GT server and MT tool update address changed Fixed: Server Login...Can't Connect to Server.123 Please note: To update your MT Box please use MT Box update tool v3.17 Old MT tool versions cant connect to GT server anymore If you try to update with old MT tool will receive error: Server Login...Can't Connect to Server.123 Download MT_Box_update_tool_v3.17

R2-Blade v1.2.6.16 released  Tuesday, 23 March 2010 Release notes: New model ZTE S315+ supported Added create log file feature for all operations in R2-Blade software All log files will be collected and separated by day/week/month for easy usage All patch files are added to software now, to prevent mistakes and loading bad patch file to phone All patch files shared by customers now will be inspected from coder side then added to software New patch files added to software - thanks for all who share FUBU and their PATCH files Some minor bugs fixed Download MT_R2_Blade_v1.2.6.16.exe

MT Box Nokia - MT Box DCT4+ patch files update v2.0  Wednesday, 17 March 2010 Release notes: New supported models and versions for DCT4+ patch unlock: 1680c-2b RM-490 - v6.22 2760h RM-391 - v5.45 5000 RM-362 - v6.32, v6.33 Added patch files for the following DCT4+ versions: V_06_22_31_07_08_RM_490__c__Nokia.flp V_05_45_23_04_08_RM_391__c__Nokia.flp V_06_32_07_05_09_RM_362__c__Nokia.flp V_06_33_20_11_09_RM_362__c__Nokia.flp Download MT_box_DCT4_patch_files_v2.0.exe

MT Box Nokia - MTB NK v2.34 BETA setup released  Friday, 12 March 2010 Release notes: Fixed old DCT4 phones unlocking issue Self Test - Auto Force to execute sim and security test E72 USB flashing fixed Fixed bug with VPP from previsions version Added old version MTB_NK v2.20 for compatibility with old loaders if have phones that fails to flash with new flash loaders New phoenix.ini added Please note: Before install new setup you need to uninstall old one (backup your important files first), or just rename old c:\Program Files\GriffinTeam\MT-Box\ to c:\Program Files\GriffinTeam\MT-Box_old\ (this is ONLY for users who does not install and use MTB NK v2.33 beta yet) Download mtb_nk_2_34_require_2.33_beta_full_setup.exe Download link 1 for mtb_nk_setup2_34.exe Download link 2 for mtb_nk_setup2_34.exe

MT Box Nokia - MTB NK v2.33 BETA setup released  Wednesday, 10 March 2010 Release notes: Now software works with new flash loaders - new Nokia protocol - 09.50.25.2 Supported Rapu Yama phones - FBUS and USB flashing tested on 5630 and 6700 Supported RAP3v4 phones - USB flashing tested on Nokia X3 (FBUS work in progress) All older phones must be supported too Added all DCT4+ patch files released till today Latest USB drivers included Some limitations in this beta: Content conversion may be not work with new flash loaders (64k to 128k) USB flashing supported only from DEAD MODE USB RAP3V4 phones (Nokia X3) only USB flash is supported APE USB flashing with new protocol may be not work Please note: Before install new setup you need to uninstall old one (backup your important files first), or just rename old c:\Program Files\GriffinTeam\MT-Box\ to c:\Program Files\GriffinTeam\MT- Download mtb_nk_setup2_33.exe

R2-Blade v1.2.5.14 released  Monday, 8 March 2010 Release notes: New model ZTE A316G+ supported Improved TNM V1 unlock Improved flash device detection Added internal alternative CFI settings Added powering-off feature after sending unlock data via test mode Added general settings button on the form for easy access Changed status bar color scheme Some minor bugs fixed New patch files added to installer - thanks for all who share FUBU and their PATCH files Patch files added: F02777A2435B1D2FC39720FC510A35461A568558.r2pf B5C70D28EAAFE014DEAFEA5854168F3B243A70A1.r2pf Download MT_R2_Blade_v1.2.5.14.exe

R2-Blade v1.1.4.9 released  Wednesday, 3 March 2010 Release notes: - Added general settings menu - right mouse click on software - Added feature to set baud rate trough general settings menu - right mouse click on software - Added fast unlock method - The data will automatically analyzed for each firmware version on first slow unlock and stored in *.ini file. When second time unlock same phone version unlock will be done in just few seconds - Improved loader initialization ( Huawei boot problem) on slow PC. - Some bugs fixed - New patch files added to installer - thanks for all who share FUBU and their PATCH files Patch files added: - EE8F3C938CE7F959552211906C234A43FEABC0BE.r2pf - 422A2025AB3A2BFE0A2F4237B0D6E2253D311F75.r2pf Download MT_R2_Blade_v1.1.4.9.exe

R2-Blade v1.1.3.7 released  Friday, 26 February 2010 Release notes: - Added new group TNM - ULC2 based phones - TNM V1- full support added - TNM V1 cable added to cables folder - New patch files added to installer - thanks for all who share FUBU files - Added auto-send unlock command after patch, so no need to enter any code after patch process - Some bugs fixed Patch files added: - 05A048AB1995D7A6E36D89D4C3B4A5C57ACFB587.r2pf - 30A63925F82F5EAAC3ED001DCE0B3EFD17A39AF8.r2pf - 3A9203CC4914E76238AD0BE8019C30438E20334A.r2pf - 78699D7983742D67BE97B45F34F90CC65E0C2531.r2pf - 9BA74E97DE5DBA12188DDECFF9340243EDE1D7A0.r2pf - A87E7F559FF3110E4B1D69D9D71E029A3DD6DF81.r2pf Download MT_R2_Blade_v1.1.3.7.exe

MT Box Nokia - MT Box DCT4+ patch files update v1.9  Wednesday, 24 February 2010 Release notes: New supported models and versions for DCT4+ patch unlock: 2760 RM-258 - v3.62 5000 RM-362 - v5.45, v6.31 2660 RM-292 - v5.62 2760h RM-391 - v6.83 Added patch files for the following DCT4+ versions: V_03_62_12_07_07_RM_258__c__Nokia.flp V_05_45_11_12_08_RM_362__c__Nokia.flp V_05_62_02_07_08_RM_292__c__Nokia.flp V_06_31_24_03_09_RM_362__c__Nokia.flp V_06_83_27_09_08_RM_391__c__Nokia.flp This patch update contain all new + all previously added patch files Download MT_box_DCT4_patch_files_v1.9.exe

R2-Blade v1.0.2.4 released  Tuesday, 23 February 2010 Release notes: ZTE A302 full support added Some bugs in communication fixed Vodafone and ZTE cable for mtbox.pdf updated Download MT_R2-Blade_v1.0.2.4.exe

MT Motomagx v1.1 - Flash release  Friday, 19 February 2010 Release notes: - Flash and change language option added - Original Motorola SBF files supported - Added phone boot downgrade warning message - Now can write custom made software and make your Motorola phone as one FTP server - please note this because in next update we will add one very interesting option - User manual updated Download MT_MoTomagx_v1.1.exe

MT Box Nokia - MT Box DCT4+ patch files update v1.8  Tuesday, 16 February 2010 Release notes: New supported models and versions for DCT4+ patch unlock: 2660 RM-292 - v3.62, v6.82 2680s RM-392 - v4.56 2720f RM-519 - v8.42 Added patch files for the following DCT4+ versions: V_03_62_05_07_07_RM_292__c__Nokia.flp V_06_82_26_09_08_RM_292__c__Nokia.flp V_04_56_02_07_08_RM_392__c__Nokia.flp V_08_42_02_09_09_RM_519__c__Nokia.flp MT_box_DCT4_patch_files_v1.8.exe

MTB NK v2.20 - FREE SD repair  Friday, 12 February 2010 Release note: FREE standalone SD repair for all users who have activated SL20 module Download MTB_NK_v2.20

R2 - Blade v1.0.0.1  Thursday, 11 February 2010 Supported ULC2 based models: - Huawei T156 - Huawei T158 - Vodafone 136 - Vodafone 236 - ZTE A66 - ZTE A306 Features: - Network unlock - Read full phone firmware - Auto analyze firmware and make patch file for unlock - No need to wait for patch files update, just read and software will make it for you automatically - Phone auto detection - Grants you MT Box Siemens - Red module activation for FREE - Very easy to use - Unlimited updates and full support for 1 year without any other additional fee - Use just 3% of your PC resource Download MT_R2-Blade_1.0.0.1.exe

MT Box Nokia - MT Box DCT4+ patch files update v1.7  Friday, 5 February 2010 Release notes: New supported models and versions for DCT4+ patch unlock: 2323c RM-543 - v9.55 2720f RM-519 - v9.55 2680s-2b RM-500 - v5.40 2680s RM-392 - v5.40 Added patch files for the following DCT4+ versions: V_09_55_12_11_09_RM_543__c__Nokia.flp V_09_55_12_11_09_RM_519__c__Nokia.flp V_05_40_18_05_09_RM_500__c__Nokia.flp V_05_40_18_05_09_RM_392__c__Nokia.flp Download MT_box_DCT4_patch_files_v1.7.exe

MT Box DCT4+ patch files update v1.6  Tuesday, 2 February 2010 Release notes: New supported models and versions for DCT4+ patch unlock: 2220 slide RM-590 - v9.55 2330c RM-512 - v8.21, v9.55 2320c RM-514 - v6.75, v8.20 2320c-2b RM-515 - v6.88 Added patch files for the following DCT4+ versions: V_09_55_12_11_09_RM_590__c__Nokia.flp V_08_21_06_07_09_RM_512__c__Nokia.flp V_09_55_12_11_09_RM_512__c__Nokia.flp V_06_75_29_04_09_RM_514__c__Nokia.flp V_08_20_30_06_09_RM_514__c__Nokia.flp V_06_88_06_07_09_RM_515__c__Nokia.flp Download MT_box_DCT4_patch_files_v1.6.exe

MT Box Nokia - MTB NK v2.11  Friday, 29 January 2010 Release note: Fixed: Unlock button says no WOTP activation Removed SL3 phone check because mtb_nk.exe incorrectly identifies 5800 as SL3 phone Please note: We does not send any email with update news to our customers. About all news you can be informed in next ways: Download MTB_Nk2.11_Setup_Files.rar

MT Motomagx v1.0a  Friday, 29 January 2010 Release note: Added new Unlock Step 1 files: ZN5 Unlock Step 1 (06.2b) ZN5 Unlock Step 1 (06.2d) E8 Unlock Step 1 (06.29) E8 Unlock Step 1 (06.ac) MT Box update tool v3.16 added User manual updated Before install new version of MoTomagx please delete whole folder MT MoTomagx from: c:\Program Files\GriffinTeam\ Download MT_MoTomagx_v1.0a.exe

MT SE Suite v1.3 - for box v1 and v2  Monday, 25 January 2010 Release notes: - MT SE suite v1.3 contain all MT box SonyEricsson supported software at one place - New MT SE software versions for MT Box v2 which have problem: Connection Failed 0002 - Software included in MT SE Suite: ARM inside v2.4 AVR inside v1.9 C62 inside v1.2 CR 16B inside v1.2 DB2020 inside v7.1 DB3xxx inside v3.8 LG inside v1.6 MT2COM v1.2 New ARM inside v3.0 Sharp inside v1.5 Symb inside v1.9 MT Box update tool v3.15 Download MT_SE_Suite_v1.3.exe

MT Box Nokia - MTB NK v2.10 - SL20 RPL standalone !  Friday, 22 January 2010 Download MTB_Nk_210-MT_Tool3.14.rar Release note: • Support for "StandAlone BB5 SL20 RPL" unlock (button SL2 RPL) • Some bug fixed • "StandAlone BB5 SL20 RPL" module activation is obtained using To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts. ( button Check Activations) • Once activated box will not connect to server for generating RPL for SL20 phones (RAP3 and RAPIDO) • AutoUnlock support for 'SL20 RPL': in griffin.ini in [interface_options] if there is entry 'autostart=1' • MT Box will enter in auto mode when you click 'sl20 rpl' in this mode, • MT should detect when phone is connected, unlock it with RPL and then prompt you to disconnect phone. • All you need to do to unlock another phone is just connect it to MT Box. When you want to terminate "AutoUnlock" mode, click the button on the 'message box' that is shown in MT. Supported all models with HASH 9DDBF: • 3600 Slide (RM-352) • 5220 Xpress music (RM-411/410) • 6600 Fold (RM-325) • 6600 Slide (RM-414) • 6600i Slide (RM-570) • 7210 Supernova (RM-436) • 7310 Supernova (RM-379/378) • 7510a Supernova (RM-398/399) • 7610s (RM-354) • 6790s-1c (RM-599) • 6790s-1b (RM-492) -------------------------------------------------------- Accounts which can be used for this activation: • GT server full access accounts • MT PRO accounts • SL20 accounts Credits needed for activation: • If box already activated for BB5+ - 20 credits • If box has no BB5+ module activated - 80 credits How to activate "StandAlone BB5 SL20 RPL" module for MT Box Nokia: • Enter your MT Box serial number – SN • Enter your GT server or MT PRO user name • Enter your GT server or MT PRO password • Select – I want to use this server account to enable MT-Box serial number specified above for StandAlone BB5 SL20 RPL Activation! • Click to Activate BB5 SL20 RPL button • Connect your MT box to USB • Run MT Tool.exe from directory where is MTB_NK.EXE (i.e. where is located file griffin.ini in most cases C:\Program Files\GriffinTeam\MT-box) and click button ‘Update’. • Do not use MT Box update tool v3.13 or older because will not work ---------------------------------------------------- How to activate "StandAlone BB5 SL20 RPL" module for MT Box Nokia using "Box Account" (SL20) credits: • Download and install • Connect your MT box to USB • Start MT box update tool v3.14 (do not use older version because will not work) • Press INFO button, software will read your MT box information • Press "Check Activation" button • Software will connect to GT server and show you all available module activations • Select desired module activation and press OK button • If you have enough credits on your "Box Account" (credits info is shown on top of window) activation will be done in just few seconds • If you does not have enough credits on your "Box Account" need to order it from your reseller How to order "Box Account" credits: • Download and install • Connect your MT box to USB • Start MT box update tool v3.14 (do not use older version because will not work) • Press INFO button, software will read your MT box information • Press GET SN button, box sn is now copied to clipboard • Paste your MT box serial number to order form, email or IM (depend which way your reseller use for "Box Credits" order) • Reseller need to inform you when your MT box is recharged with new amount of credits or you can check by your self by pressing Info button in MT tool

MT SE suite v1.2  Monday, 28 December 2009 Release notes: - MT SE suite v1.2 contain all MT box SonyEricsson supported software at one place - New MT SE software versions for MT Box v2 which have problem: Connection Failed 0002 - Software included in MT SE Suite: ARM inside v2.3 AVR inside v1.8 C62 inside v1.1 CR 16B inside v1.1 DB2020 inside v7.1 DB3xxx inside v3.8 LG inside v1.5 MT2COM v1.2 New ARM inside v2.9 Sharp inside v1.4 Symb inside v1.9 Download MT SE Suite v1.2

MT Box Nokia - MTB NK v2.02  Friday, 27 November 2009 Supported all models with HASH 9DDBF: 3600c, 5220, 7210c, 7310, 7510a, 6600s, 6600f, 7610s etc ˇ­ Features: - Generate Unlock RPL for any SL20 Rapido Nokia phone - Generate Unlock RPL for any SL20 RAP3 Nokia phone - Generate custom Super Dongle data - Local SX4 authorize after repair - Repair problems with E71, 5800, E66 etc - Calculate SimLock RPL RAP3G (does not repair IMEI 123456-12-654321-x, CCC, HWC and DRM problems) - Repair SimLock and SX4 on RAP3 and RAPIDO phones (SL20) - HASH 9DDB phones unlock ( 3600c, 5220, New 5800, 7210c, 7310, 6600s, 6600f, 7610s, New 96 etc... ) - Is absolutely new service on GT server - Working only with new credits and process for credits order and activation is totally new - Now we add credits directly to box SN - Login way as before with user name and pass does not work for this new service - Credits usage: 10 credits per unlock - gen SX4 - is intended to repair SimLock and sx4 on RAP3 and RAPIDO phones (SL20). This helps revive phones that were damaged by other boxes while trying to unlock them. Example of such phones is 5800, 7210, E71 that restart because of missing SX4. This button will not repair missing HWC,CCC,NPC certificates. Also it will not generate CMLA, DRM data. Cost 12 new credits (SL20rpl/genSX4) - generate SimLock and super dongle data How to order credits for your box: - Download and install MT box update tool v3.11 - Connect your MT box to USB - Start MT box update tool v3.11 (its found in c:\Program Files\GriffinTeam\MT-Box\MT Tool.exe ) - Press INFO button, software will read your MT box information - Press GET SN button, box sn is not copied to your clipboard - Paste your MT box serial number on order form, email or IM (depend which way your reseller use for credits Download MTB_NK_GTR_v2.02.exe

MT Box SE - DB2020 inside v7.0  Saturday, 24 October 2009 Release notes: New supported model w205 New Locosto loaders added DB2020_inside_v7.0.exe

MT Box Nokia - MT Box DCT4+ patch files update v1.5  Monday, 5 October 2009 Release notes: New supported models and versions for DCT4+ patch unlock: 2323c RM-543 - v6.75 2600c RM-340 - v6.82 2600c RM-340 - v7.60 Added patch files for the following DCT4+ versions: V_06_75_29_04_09_RM_543__c__Nokia.flp V_07_60_10_04_09_RM_340__c__Nokia.flp V_06_82_26_09_08_RM_340__c__Nokia.flp Download MT Box DCT4+ patch files update v1.5

MT Box Nokia - MT Box DCT4+ patch files update v1.4  Wednesday, 30 September 2009 Release notes: New supported models and versions for DCT4+ patch unlock: 2680s RM-392 - v4.91, v5.28 2760 RM-258 - v6.82, v7.60 Added patch files for the following DCT4+ versions: V_07_60_10_04_09_RM_258__c__Nokia.flp V_06_82_26_09_08_RM_258__c__Nokia.flp V_05_28_05_11_08_RM_392__c__Nokia.flp V_04_91_03_09_08_RM_392__c__Nokia.flp Download MT Box DCT4+ patch files update v1.4.exe

MT Box Nokia - MT Box DCT4+ patch files update v1.3  Friday, 25 September 2009 Release notes: New supported models and versions for DCT4+ patch unlock: 1680c RM-394 - v6.82 2630 RM-298 - v6.82, v7.60 Added patch files for the following DCT4+ versions: V_06_82_26_09_08_RM_394__c__Nokia.flp V_07_60_10_04_09_RM_298__c__Nokia.flp V_06_82_26_09_08_RM_298__c__Nokia.flp MT box update tool v3.11 added, changed button name "Torrent access" to "Download zone" How to login to support: Connect MT box to USB port Start MT box update tool v3.11 Press "Download zone" button Your default Internet browser will be started and you automatically logged to Download zone Our recommendation is Mozilla Firefox to prevent troubles with IE7 or IE8 Download MT Box DCT4+ patch files update v1.3

MT Box Nokia - MT Box DCT4+ patch files update v1.2  Wednesday, 23 September 2009 Release notes: By my mistake two wrong patch files are uploaded for download. Please download new version 1.2 with and install it, old not good files will be replaced with good on. I am sorry one more time for caused troubles from my side. All people who report till now in their post lost credits using these two wrong patch files need to send me using pm next details: Phone model Phone imei User name for GT server Admin will check and refund lost credits to their account Download MT_box_DCT4_patch_files_v1.2.exe

MT Box Nokia - MT Box DCT4+ patch files update v1.1  Monday, 21 September 2009 Release notes: New supported models and versions for DCT4+ patch unlock and imei c h a n g e: 2330c RM-512 v6.46 2630 RM-298 v57.20 1680c RM-394 v7.60 Added patch files for the following DCT4+ versions: V_06_46_23_03_09_RM_512__c__Nokia.flp V_57_20_09_02_09_RM_298__c__Nokia.flp V_07_60_10_04_09_RM_394__c__Nokia.flp Download MT_box_DCT4_patch_files_v1.1.exe

MT Box Nokia - MTB NK v1.60 setup  Tuesday, 15 September 2009 Release notes: Added support for FBUS flashing "RAPU-YAMA" phones : E52, 6700, 5630 etc... Fixed number of files that can be flashed to new BB5 phones. Changes regard to E71, E66 flashing. For those phones, in 'Automatic actions while flashing' option 'Low level format before Content' must be checked. For BB5 phones, this option will restart phone in Normal Mode after MCU flash, and execute 'low level format' this is needed in order for phone to normally flash PPM. Because this phones uses a lot of power it might be unable to restart in Normal Mode. In such case we recommend the following procedure as work around: Solution 1: 1. Flash just MCU Flash file (check MCU checkbox only). 2. Put battery in phone and start. 3. Wait 10 seconds after it powers on. 4. Connect to MT and flash the other files ( uncheck MCU box, and check boxes for other files). 5. Flashing should proceed normally, and after flash phone will be in local or test mode. Solution 2: Connect original Nokia charger to MT, this could help phone to start in normal mode. New supported models and versions for DCT4+ patch unlock: 2680s RM-392 - v6.17 2680s RM-392 - V56.17 2720f RM-519 - v8.20 2323c RM-543 - v8.20 2330c RM-512 - v8.20 Added patch files for the following DCT4+ versions: V_06_17_10_03_09_RM_392__c__Nokia.flp V_56_17_24_03_09_RM_392__c__Nokia.flp V_08_20_30_06_09_RM_519__c__Nokia.flp V_08_20_30_06_09_RM_543__c__Nokia.flp V_08_20_30_06_09_RM_512__c__Nokia.flp Unlock price reduced to 2 credits per phone (price about 1 euro) Imei C H A N G E price 2 credits per phone (price about 1 euro) Download MTB NK 1.60 setup Download DCT4-patch_files.rar

MT Box Nokia - MT Box DCT4+ patch files update v1.0  Monday, 14 September 2009 Release notes: - C H A N G E IMEI supported for all new DCT4+ models (by using "empty button") - Added unlock patch files for new DCT4+ models and versions - Supported models and software versions: - 2330c RM-512 - v8.20 - 2323c RM-543 - v8.20 - 2720f RM-519 - v8.20 All MT box Nokia users can use it without any additional activation! To able use it you need MTB NK 1.59.32 Download MT_box_DCT4_patch_files_v1.0.exe Download MT_box_DCT4_patch_files_v1.0.exe without 1.59&1.59.32.

MT Box Nokia - MTB NK v1.59.32  Friday, 4 September 2009 Release notes: - Added support for new DCT4+ unlock - Supported models and software versions: 7100s RM-438 - v5.22, v5.41, v6.31 2330c RM-512 - v6.75 2610b RH-86/RH-87 - v7.04a Unlock cost 5 GT server credits for small quantity of phones. Also is available special accounts for quantity over 500 phones. To able use it install MTB NK 1.59 setup.exe first Then download and install 1.59.32 Download MTB NK v1.59.32

MT SE Suite v1.1  Wednesday, 2 September 2009 Release notes: MT SE suite v1.1 contain all MT box SonyEricsson supported software at one place Software included in MT SE Suite: ARM inside v2.3 AVR inside v1.8 C62 inside v1.1 CR 16B inside v1.1 DB2020 inside v6.9 DB3xxx inside v3.7 LG inside v1.5 MT2COM v1.1 New ARM inside v2.9 Sharp inside v1.4 Symb inside v1.8 Download MT_SE_Suite_v1.1.exe

DB3xxx inside v3.7  Tuesday, 1 September 2009 Release notes: - Changed visible file names to be very short, added file path you can see if click with mouse over file name New files in installer: - DB3xxx inside v3.7 Download DB3xxx_inside_v3.7.exe

Symb inside v1.8  Tuesday, 1 September 2009 Release notes: Changed visible file names to be very short, added file path you can see if click with mouse over file name New files in installer: Symb inside v1.8 GDFS backups User manual updated Download Symb inside v1.8

DB2020 inside v6.9  Monday, 31 August 2009 Release notes: - Changed visible file names to be very short, added file path you can see if click with mouse over file name New files in installer: - DB2020 inside v6.9 Download DB2020_inside_v6.9.exe

DB3xxx inside v3.6  Friday, 21 August 2009 Release notes: - Resolved offline unlock for CID 52 phones Download Here

MT SE Suite v1.0  Wednesday, 29 July 2009 Release notes: - MT SE suite v1.0 contain all MT box SonyEricsson supported software at one place - Software included in MT SE Suite: ARM inside v2.3 AVR inside v1.8 C62 inside v1.1 CR 16B inside v1.1 DB2020 inside v6.7 DB3xxx inside v3.4 LG inside v1.5 MT2COM v1.1 New ARM inside v2.9 Sharp inside v1.4 Symb inside v1.7 Download MT_SE_Suite_v1.0.exe

MT Box Nokia - MTB NK 1.59 setup  Wednesday, 1 July 2009 Release notes: Added button 'RapidoRPL' - use this to calculate SIMLOCK in RPL format, and repair rapido phones with damaged simlock data Fixed FBUS flashing to solve problem with very slow flashing 5310 to version 10.10 Fixed FBUS boot of some slow BB5 models - 5220, 6600, etc ... Added support for USB flashing 5130 and similar models (using Dead USB is more stable) All Server accounts who have service enabled for code generation or rapido phones (dk_sl2 service) also now have enabled RPL service for price of 10 credits ( this is dksl2XXXXX limited accounts and full accounts) Fixed flashing bugs for some RAPIDO phones Added Nokia_Connectivity_Cable_Driver 7.1.8.0 and Nokia_Flashing_Cable_Driver 8.23.0.0 Download here

MT Box Nokia - MTB NK 1.58  Monday, 15 June 2009 Release notes: - Added button 'RapidoRPL' - use this to calculate SIMLOCK in RPL format, and repair rapido phones with damaged simlock data - Fixed FBUS flashing to solve problem with very slow flashing 5310 to version 10.10 - Fixed FBUS boot of some slow BB5 models - 5220, 6600, etc ... - Added support for USB flashing 5130 and similar models (using Dead USB is more stable) - All Server accounts who have service enabled for code generation or rapido phones (dk_sl2 service) also now have enabled RPL service for price of 10 credits ( this is dksl2XXXXX limited accounts and full accounts)

DB2020 inside v6.7  Monday, 15 June 2009 Release notes: - Added flash, unlock and repair support for new Neptune (S1) model S312 - Added new loaders - Changed the unlock way via server Please note: Use only DB2020 inside v6.7 or higher to unlock phones via server. Old versions cant connect to server anymore.

Symb inside v1.7  Monday, 15 June 2009 Release notes: - Supported unlock via server for all Symbian models (10 GT server credits) - Added new open signed drivers - Problem in communication with server resolved Please note: Use only Symb inside v1.7 or higher to unlock phones via server. Old versions cant connect to server anymore. Download Here

DB3xxx inside v3.4  Monday, 15 June 2009 Release notes: - Added flash, unlock and repair support for new models C901 CID 53, T707 CID 53, W508 CID 53 and W995 CID 53 - Added new loaders - Problem in communication with server resolved Please note: Use only v3.4 or higher to unlock phones via server. Old versions cant connect to server anymore.

MT Box Nokia - MTB NK 1.58  Monday, 15 June 2009 Release notes: - Added button 'RapidoRPL' - use this to calculate SIMLOCK in RPL format, and repair rapido phones with damaged simlock data - Fixed FBUS flashing to solve problem with very slow flashing 5310 to version 10.10 - Fixed FBUS boot of some slow BB5 models - 5220, 6600, etc ... - Added support for USB flashing 5130 and similar models (using Dead USB is more stable) - All Server accounts who have service enabled for code generation or rapido phones (dk_sl2 service) also now have enabled RPL service for price of 10 credits ( this is dksl2XXXXX limited accounts and full accounts)

MTB NK Setup v1.57  Wednesday, 11 March 2009 MTB_NK 1.57 Setup Release: - MTB_NK 1.57.2 Fixed/improved RAP3 SL20 unlock. - MT Tool 3.9

mtb_nk 1.57.2 version  Tuesday, 10 March 2009 - this version must fix bugs about "operation failed". please test and post result.

MT Box Nokia - MTB NK 1.57.1  Saturday, 7 March 2009 Release notes: * Fixed mtbox crash when box not activated

BB5+ unlock standalone, no logs, no internet required  Friday, 6 March 2009 *note: this activation is not FREE To able unlock new BB5+ phones you need to activate your MT Box Nokia for this feature. Activation can be done very easy and take about 1 minute for complete operation. If you already have account on our server and minimum 200 credits available you can activate Nokia MT-Box for BB5+ unlimited unlock without Test point. If you already have activation for BB5 wotp the activation for BB5+ will cost to you 100 credits only (server recognize does you have BB5 wotp already or not). After activation your server account WILL BE CHARGED and selected MT-Box is ready for BB5+ unlock activation. How to activate: Enter your MT Box serial number - SN Enter your GT server or MT PRO user name Enter your GT server or MT PRO password Select - I want to use this server account to enable MT-Box serial number specified above for BB5+ Activation! Click to Activate BB5+ button Connect your MT box to USB Run MT Tool v3.8.exe from directory where is MTB_NK.EXE (i.e. where is located file griffin.ini in most cases C:\Program Files\GriffinTeam\MT-box) and click button 'Update'. Do not use MT Box update tool v3.7 or older because will not work If you receive an error, please check your MT box SN or login details, or maybe you does not have enough credits on your GT server account. Your box is ready for unlock BB5+ phones Close MT box update tool v3.8 Start or higher Connect phone to box FBUS cable Phone need to be in LOCAL mode Press phone info button Press DK SL2 button Unlock time is approx 20 seconds per phone Supported phone models: 3120C 5310 5610 5610d 6301 6500C 6500S 6555 7500

MT Box Nokia - MTB NK 1.57  Friday, 6 March 2009 Release notes: - Unlock standalone, no logs or internet required - Supported models: * 3120C * 3555 * 5310 (except mcu sw version > 50.00 - SL30) * 5610 * 5610d * 6300i * 6301 * 6500S (except mcu sw version > 50.00 - SL30) * 6500C * 6555 * 7500 * 7900 * 8800 Arte - For BB5 wotp activation owners the price is half

MTB NK Setup v1.56 released  Thursday, 5 March 2009 MTB NK Setup v1.56 released. Fixed some bugs in USB/FBUS flashing and fbus serial communications. download from support area.

DB3xxx inside v3.1  Monday, 2 March 2009 Release notes: - Added new DB3210 models C510, W705 and W715 - Unlock, Flash and Repair supported - Repair damaged EROM - Key color conversion from Blue or Brown to Red

MT-RED PRO 1.8.2.363 update  Tuesday, 27 January 2009 MT-RED PRO 1.8.2.363 update What's new? - new unique free standallone direct unlock method for ULC2 based phones - new unique feature to check lock states on ULC2 based phones - model list updated - added CORAL 500 and ZTE A66 with full support - new enable rebuild settings - general settings menu - upgraded - minor interface changes

DB2020 inside v6.2  Tuesday, 20 January 2009 Release notes: - Added unlock support for Locosto J132 with old mcu standalone - Added unlock support for Locosto J132 with new mcu via GT server - Backup and restore SP data for J132 - Flash and language change for J132 - Added reset total call time file for Neptune phones - Added reset user lock file for Neptune phones - Cable cheme for J132 available in documents folder - User and video manual updated Note: - 20 GT server logs required for unlock via server per phone - Server work 24h - MT PRO BB5 credits also can be used for all services on SE server

DB3xxx inside v3.0  Friday, 16 January 2009 Release notes: - Added free standalone Unlock for DB3210 phones - Standalone GDFS SP data repair - Repair damaged EROM - Key color conversion from Blue or Brown to Red Please note: Because of name change from DB31xx to DB3xxx, software will install to: C:\Program Files\GriffinTeam\MT SonyEricsson\DB3xxx inside\ please move your backup files to the new software directory

DB2020 inside v6.1  Saturday, 10 January 2009 Release notes: - Added unlock support for Neptune phones F305, S302 and W302 via GT server in REAL TIME. No need to wait for logs to be calculated. - Unlock supported for Locosto phones all models via GT server for new and old MCU - Backup and Restore SP data for Neptune phones - Backup and restore SP data for Locosto phones - New USB drivers v2.2.0.0 added - User and video manual updated Note: - 20 GT server logs required for unlock via server per phone - Server work 24h - MT PRO credits also can be used for all services on SE server

DB3xxx inside v2.9  Friday, 9 January 2009 Release notes: - Added support for DB3200 and DB3210 SonyEricsson platform - New models supported C905 CID 52, G705 CID 52, W902 CID 52 - Added unlock support via server for DB3210 platform ( 20 logs) - Hi-Speed USB flash support allowed, now flash phones 2-3 x faster depend from phone model and flash ic inside. Recommended DCU65 cable for best performance - New USB drivers added V2.2.0.0 - Reset user lock and total call timer for DB3210 - Added new flash loaders for both platforms - DB3210 CUS files are now located in root folder for each phone model and can be used with any firmware version Please note: Because of name change from DB31xx to DB3xxx, software will install to: C:\Program Files\GriffinTeam\MT SonyEricsson\DB3xxx inside\ please move your backup files to the new software directory

DB2020 inside v6.0  Sunday, 4 January 2009 Release notes: - Added new phone model F305 and S302 - Neptun platform - Added new REST files for JAVA unlock method

DB2020 inside v5.9  Monday, 29 December 2008 Release notes: • Added flash support for Neptun platform • Added new phone model W302 - Neptun • Supported USB flash for K330, R300, R306 and T303 • Reduced locosto unlock speed • Added new REST files for JAVA unlock method How to flash NEPTUN phone - W302 • Connect MT box to PC and start software. • Add flash files to software MCU+DEC+CUS • Mark USB check box, now your box is USB master dongle. • Now connect USB cable DCU-60 (come with phones in package) to PC • Take the phone and PRESS and HOLD C button on phone keyboard • Connect phone to USB cable • Wait to new window appears • Press DoIt button How to flash K330, R300, R306 and T303 using USB cable • Check phone battery and phone functionality before start to flash it • Connect MT box to PC and start software. • Select phone model K330, R300, R306 or T303 depend what phone model you have • Add to software file list necessary files: MCU: T303_R2DA004_EASTERN_EUROPE_1209-8174.mcu CUS: T303_CDF_1213-9654_EASTERN_EUROPE.cus • We recommend you to add 3rd file: T303_Clean_FS.mcu • If you do not want to change phone customization, just do not add CUS file to software. • Mark USB check box, now your box is USB master dongle. • Take the phone and PRESS and HOLD C button on phone keyboard • Connect phone to USB cable • Wait to new window appears • Press DoIt button • Wait to software finish then power the phone T250 and T280 is not supported for USB flash W302 USB flash log DB2020 Inside v5.9 29.12.2008. 11:29:06:609 MODEL:....W302 IMEI:.....356535-02-xxxxxx MCU:......1207-2375_GENERIC_R1AB005 CDA:......1211-0582_R6A Processing: W320_R1AB005_1207-2375_GENERIC.mcu Calculating... OK! Processing: W302_R1AB005_FS_1207-2451_CENTRAL-EUROPE Calculating... OK! Processing: CDF_1211-0582_W302_Customized_Central_Europe Calculating... OK! Total:00:04:45:875 The end. T303 USB flash log DB2020 Inside v5.9 29.12.2008. 11:34:48:578 MODEL:....T303 IMEI:.....355754-02-xxxxxx MCU:......1209-8174_R2DA004 CDA:......1213-9654_R5A Processing: T303_CDF_1213-9654_EASTERN_EUROPE.dec Calculating... OK! Processing: T303_R2DA004_EASTERN_EUROPE_1209-8174 Calculating... OK! Total:00:02:10:047 The end.

DB31xx inside v2.8  Saturday, 27 December 2008 Release notes: - Free standalone OFFLINE Unlock support for all DB3150 phones - Free standalone GDFS SP data repair - Repair damaged EROM - Key color conversion from Blue or Brown to Red - Added backup and restore GDSF SP data - Added new flash loaders How to unlock phone standalone • Connect MT box to PC and start DB31xx software. • Select phone model • Add “Unlock DB3150 Part1.act” file to software. It is located under “Unlock standalone” folder • Mark USB check box, now your box is USB master dongle. • PRESS and HOLD 2+5 button on phone keyboard • Connect phone to USB cable • Press DoIt button • After software finish Part 1, disconnect phone from cable • Recconect phone battery • Phone cant turn on in this stage and phone key color is BLUE now • Uncheck USB in software • Remove “Unlock DB3150 Part1.act” from software • Add “Unlock DB3150 Part2.act” file to software. It is located under “Unlock standalone” folder • Mark USB check box, now your box is USB master dongle. • PRESS and HOLD 2+5 button on phone keyboard • Connect phone to USB cable • Press DoIt button • When software finish, disconnect phone • Reconnect battery • Turn phone on It is recommended to make SP data backup before unlock How to backup SP data • Connect MT box to PC and start DB31xx software. • Select phone model • Add “Backup SP data.act” file to software. It is located under “Backup and Restore” folder • Mark USB check box, now your box is USB master dongle. • PRESS and HOLD 2+5 button on phone keyboard • Connect phone to USB cable • Press DoIt button • SP data backup are stored into: • C:\Program Files\GriffinTeam\MT SonyEricsson\DB31xx inside\backup\phone model\your phone imei How to restore SP data • Connect MT box to PC and start DB31xx software. • Select phone model • Add “Restore SP data.act” file to software. It is located under “Backup and Restore” folder • Mark USB check box, now your box is USB master dongle. • PRESS and HOLD 2+5 button on phone keyboard • Connect phone to USB cable • Press DoIt button • Software will ask you for phone backup • Point to: • C:\Program Files\GriffinTeam\MT SonyEricsson\DB31xx inside\backup\phone model\your phone imei • Wait to software finish How to convert BLUE or BROWN key to RED • Add “Unlock DB3150 Part2.act” file to software. It is located under “Unlock standalone” folder • Mark USB check box, now your box is USB master dongle. • PRESS and HOLD 2+5 button on phone keyboard • Connect phone to USB cable • Press DoIt button • Wait to software finish How to repair damaged SP data • Step1. • Connect MT box to PC and start DB31xx software. • Select phone model • Add “Restore SP data.act” file to software. It is located under “Backup and Restore” folder • Mark USB check box, now your box is USB master dongle. • PRESS and HOLD 2+5 button on phone keyboard • Connect phone to USB cable • Press DoIt button • Software will ask you for phone backup • Point to: • C:\Program Files\GriffinTeam\MT SonyEricsson\DB31xx inside\backup\phone model\any backup • Wait to software finish • Step2. • Unlock phone using Standalone process Page11 • If this not help try this way: • Make Step2 (Unlock phone using Standalone) • Make Step1 (Restore any backup from same phone model) • Make Step2 (Unlock phone using Standalone) How to repair EROM Just unlock phone standalone

MTB_NK 1.55.5 Setup Release:  Monday, 22 December 2008 1. Added latest Flash Loaders - now you can flash N96 via FBUS also. No more modifications in griffin.ini 2. Added files required for DK SL2 unlocking. (rapido based phones with sl20 simlock) 3. Added latest phoenix.ini

DB31xx inside v2.7  Saturday, 20 December 2008 Release notes: - Unlock and flash support for new model TM506 CID 52

DB2020 inside v5.8  Wednesday, 17 December 2008 Whats new: - Reduced locosto unlock speed - Added new REST files for JAVA unlock method Note: Please use full charged battery when unlock locosto phones to exclude possible mistakes

All MT box Nokia, MT PRO and MT PRO lite updates  Monday, 24 November 2008 All MT box Nokia, MT PRO and MT PRO lite updates MT Box Nokia - MTB NK v1.55.4 Fixed some bugs in interface to Dejan SP2 unlocking.

MT Box Nokia - MTB NK v1.55.1  Wednesday, 19 November 2008 Release notes: This is interface to Dejan BB5 SP2 unlocker. You need to have a smart card to use this. If we get good price for card we can put this on the server later. How to use it: Copy smart card KEY FILE to bb5hash dir. Connect supported phone to mt-box and click "DK_SL2" button.

DB2020 inside v5.7  Tuesday, 18 November 2008 What's new: - Fixed PNX pones detection bug - Added new REST files for JAVA unlock method

MT Box Nokia - MTB NK v1.55 and mtb_nk_setup1_55.exe  Tuesday, 18 November 2008 available on support area. MTB_NK 1.55 Release: 1. Added support for bb5 without TP unlock for activated boxes - rap3gv2,rap3gv3, rapido (tested on 6290,5700, E90) 2. Reverted to old flash loaders. To Flash N96 you must edit griffin.ini - to flash ONLY N96 phone: flashldr_folder=C:\Program Files\GriffinTeam\MT-Box\FlashLoaders\Flash_N96\ - to flash all other phones: flashldr_folder=C:\Program Files\GriffinTeam\MT-Box\FlashLoaders\Flash\ 3. Added MT Tool v3.7 Supported phone models: N95 (RM-159) N95 (RM-245) N95 (RM-160) 5700 (RM-230) 5700 (RM-302) 6290 (RM-176) N76 (RM-135) N76 (RM-149) E90 (RA-6)

MT-RED PRO 1.8.0.347 Alpha installer  Monday, 17 November 2008 What's new? - added boot-recovery support for 32MBit devices with signature ID: 0x19 (Vodafone 231) - added boot-recovery support for 64MBit devices with signature ID: 0x14 (Sagem my310x) - added support for Qualcomm based phones V715, V716 (Huawei U120), V720, V725, V810 - added new enable imei rebuild settings - added additional eep info for sagem based phones - installer upgraded - added MT-BOX USB drivers and Huawei-Vodafone usb drivers Before connect V715, V716 (Huawei U120), V720, V725, V810 phone must be in dnld mode! hold phone keys '*' + '0' + '#' and press power-ON

Symb inside v1.6  Friday, 14 November 2008 Release notes: - Unlock via server for all Symbian models (20 GT server credits) - Added new open signed drivers - Added Backup / Restore GDFS - Added Backup / Restore SP data Please note: BB5 PRO accounts can be also used to activate MT SE on your MT box BB5 PRO accounts can be also used for unlock Symbian phones via GT server

DB2020 inside v5.6  Monday, 10 November 2008 Whats new: - Make GDFS backup for DB2020 and DB2012 phones - Restore GDFS backup for DB2020 and DB2012 phones - Make SP data backup for DB2020 and DB2012 phones - Restore SP data backup for DB2020 and DB2012 phones - Unlock and repair RED LED BLINKING phones (require 20 GT server credits) - Added new JAVA unlock files for DB2020, DB2012 and PNX phones - Fixed bugs when write cus file, and JAVA unlock file

DB2020 inside v5.5  Thursday, 6 November 2008 Whats new: - K330 flash and unlock supported - Added new flash loaders - Added support for USB boot using 2+5 key - Added new JAVA unlock files for DB2020, DB2012 and PNX phones

MT Box SonyEricsson - DB31xx inside  Thursday, 6 November 2008 Whats new: - DB3150 unlock and GDFS repair price droop from 30 to 20 GT server credits

DB31xx inside v2.6  Monday, 20 October 2008 Release notes: - Unlock and flash supported for mew models T700 and W595 CID 52 - Added new flash loaders

MT Box RED - v1.7.2.345 BETA  Friday, 17 October 2008 Release notes: - Added new models ZTE A135 and ZTE A136 with full support - Enabled rebuild security function for my310x - Added new imei rebuild settings - Minor interface changes

New ZTE files on support  Thursday, 16 October 2008 New ZTE A135 and A136 files available on support: - ZTE A135 upgrade files: ZH_P108A9V1.0.0B05__Languages(EN_ZH) ZH_ZTE_P108A9V1.0.0B05__Languages(EN_ZH) - ZTE A136 upgrade files: ZH_ZTE_HS_P108A10V1.0.0B01_Languages(EN_ZH) ZH_ZTE_P108A10V1.0.0B04__Languages(EN_ZH) ZH_P108A10V1.0.0B05__Languages(EN_ZH)

NEW DB31xx inside files on support  Thursday, 16 October 2008 SonyEricsson C902 CID 52 firmware versions updated: - R3CA033 - R3CA038 SonyEricsson C902 CID 52 new firmware version available: - R3DA026 - R3DA028

MT Box PRO/LITE update  Wednesday, 15 October 2008 - Added string for unlock N95(RM-159) Ver: V_06WK41V59_1_02-06-08_RM-159_(C)_NOKIA

New ZTE files on support  Wednesday, 15 October 2008 New ZTE A69+ files available on support: - Upgrade/Repair files: SAHELCOM-P108A6FMB01-EnFr-NE01 Languages (EN, FR) - EEPROM files: EEPROM version:11 according to FW: SAHELCOM-P108A6FMB01-EnFr-NE01 - BOOTCORE: ZTE A69+ BOOTCORE

MT Box RED - v1.7.1.342 Alpha  Wednesday, 15 October 2008 Release notes: - Added new model: ZTE A69+ with full support - Free unlock method for SI-activated boxes, - Rebuild security, - Read user code, - Read/Write security, - Read/Write EEPROM, - Write Firmware - Added flexible "BC Signature check" maintenance via INI file - Added read eeprom version

MT Box SonyEricsson - DB2020 inside v5.4  Tuesday, 14 October 2008 - Fixed problem when boot Lacosto phones - Added unlock file for J120 new phone versions - Reduced speed for Lacosto phones - Added new JAVA unlock files for DB2020, DB2012 and PNX phones

Mt-box Nokia 1.53 Setup released  Thursday, 9 October 2008 - Added Nokia N96 USB Flashing. download from support area.

DB31xx inside v2.5  Saturday, 4 October 2008 Release notes: - Some bug in server communication fixed - Added new flash loaders - Fixed problem caused by Zone Alarm, even is disabled

MT-RED PRO 1.7.0.338 update  Tuesday, 30 September 2008 What's new? "ENABLED FREE PATCH UNLOCK FOR ALL ULC2 BASED PHONES VIA SI-ACTIVATION" - Vodafone 125, 225, 227, 228, A35, A36, A61 - ZTE - Vodafone 226,231 - Vodafone Sagem - Sagem my150x, My220X, My220V, My230X, My231X, My310X - Sagem - Coral 100, 200 - ZTE added new models Sagem my230X - Free unlock method for SI-activated boxes - Reset bad attempts count (*GTServer logs required) - Read user code - Read/Write security - Read/Write EEPROM - Write Firmware

DB2020 inside v5.3  Saturday, 27 September 2008 Whats new: - Added repair boot support for J110/J120 phones - Added new rest files for DB2012, DB2020 and PNX phones

MT-RED PRO 1.6.1.335 update  Saturday, 27 September 2008 What's new? added new models Sagem my231X and Vodafone 231 - Free unlock method for SI-activated boxes - Reset bad attempts count (*GTServer logs required) - Read user code - Read/Write security - Read/Write EEPROM - Write Firmware

DB2020 inside v5.2  Friday, 19 September 2008 Whats new: - Added new model R306, flash and unlock supported - Unlock procedure optimized for all Lacosto models - T303 unlock and flash bug corrected - Added new rest files for DB2012, DB2020 and PNX phones

DB31xx inside v2.4  Wednesday, 17 September 2008 Release notes: - Some bug in server communication fixed - Added GDFS backups for repair

DB31xx inside v2.3  Monday, 15 September 2008 Release notes: - Unlock via GT server enabled for DB31xx (A2) platform - Added support to restore SP data - Added automatic and manual SP data backup feature - Repair red led blinking phones (SP data damaged) supported - Some bug fixed Server credits charge: 30 credits per phone (about 15 euro) Supported phone models: C702 CID 52 C902 CID 52 G502 CID 52 K630 CID 52 K660 CID 52 K850 CID 52 V640 CID 52 W760 CID 52 W890 CID 52 W910 CID 52 W980 CID 52 Z750 CID 52 Z770 CID 52 Z780 CID 52

MT-RED PRO 1.6.0.330 update  Friday, 12 September 2008 - Fixed bug in my310x free unlock module.

Sagem my310x with full support  Wednesday, 10 September 2008 What's new? Added support for Sagem my310x - Unlock - traditionally free of charge for SI-activated boxes - Read user code - free of charge - Read security backup - free of charge - Read EEPROM backup - free of charge - Flashing - free of charge (*only SI-Activated boxes) - Reset bad attempts counter and unlock - (*GTServer logs required) Ready for download from support site [1.6.0.329] //official release *Removed Rebuild imei & security (will be implemented in any next release) - added reset attempt couter [1.6.0.325 beta non official] - GTServer module upgraded [1.6.0.324 alpha internal] -added read user code for Sagem my310X, Sagem my220X, sagem my220V, vodafone 226 [1.6.0.323 alpha internal] -added new model: *Sagem my310X - Lock to custom network - Direct Unlock - Rebuild imei - Rebuild security - Free unlock method for SI-activated boxes .....

DB2020 inside v5.1  Monday, 1 September 2008 Whats new: - Added new models R300 and T303, flash and unlock supported - Added new rest files for DB2012, DB2020 and PNX phones If you make any REST file which does not exist in installer please post it in this topic and we will include it in next installer:

DB31xx inside v2.2  Wednesday, 27 August 2008 Whats new: - Supported W980 and Z780 CID 52 - New flash types supported - Added new flash loadersv - Some bug fixed The software can be used also with ALL upgraded MT box Siemens and MT box Nokia to MT box SonyEricsson.

DB2020 inside v5.0  Thursday, 7 August 2008 Whats new: - Added unlock support for T280 - Added new rest files for DB2012, DB2020 and PNX phones - Some old files moved from installer (eg FLR files for previous unlock method) Please use JAVA unlock method - Some old features which is not longer in use are moved from user manual If you make any REST file which does not exist in installer please post it in this topic and we will include it in next installer: All users need to download and install full installation "DB2020 inside v5.0.exe" Our recomendation is to delete old installation from (C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\) then instal new v5.0 Please keep your files from C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\ as backup before delete it The software can be used also with ALL upgraded MT box Siemens and MT box Nokia to MT box SonyEricsson. Please note: MT SE support will be on vocation from 09.08.2008 to 21.08.2008

new version MTB Nokia 1.52  Monday, 4 August 2008 new version MTB Nokia 1.52 Fixed E66 USB Flashing. Fixed N95 RM-160 unlock. download from support area

new patch files for DCT4+ available for download  Monday, 4 August 2008 new patch files for DCT4+ available for download. Nokia 2760 RM-258 V 5.61 Nokia 2310 RM-189 V 6.30 Nokia 2310 RM-189 V 6.52 Nokia 1680c RM-394 V 05.61 Nokia 2630 RM-298 V 5.61

Symb inside v1.5  Friday, 1 August 2008 Release notes: - Added new model G700 - Added new model G900 - Updated all links in user manual - Added file description for G700 and G900 - Added Smart phone drivers to phone drivers folder The software can be used with all MT box SonyEricsson and upgraded MT box Nokia/RED to MT box SE.

MT SE USB flash drivers update  Friday, 25 July 2008 Whats new: - Added latest SE USB drivers for DB2020 and DB31xx inside Short manual: - Download and install "USB_flash_driver_v2.1.0.0.exe" - Drivers will be automatically placed to DB2020 and DB31xx inside installation folders - When software ask you for drivers point to: C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\USB_flash_driver_v2.1.0.0\ or C:\Program Files\GriffinTeam\MT SonyEricsson\DB31xx inside\USB_flash_driver_v2.1.0.0\

DB31xx inside v2.1  Friday, 25 July 2008 Whats new: - New flash types supported - Added new flash loaders - Some bug fixed The software can be used also with ALL upgraded MT box Siemens and MT box Nokia to MT box SonyEricsson.

DB2020 inside v4.9b  Tuesday, 22 July 2008 Whats new: - Added new REST files for JAVA unlock method - Added Restore GDFS Backup-w200-cid53 file - Added Repair Red Blinking for all CID - Updated all links in user manual If you make any REST file which does not exist in installer please post it in this topic and we will include it in next installer:

DB31xx inside v2.0  Monday, 14 July 2008 Whats new: - Added new model C902 - Added new model G502 - Added new model W760 - New flash files available on support area - User manual updated

new version is out 1.51_1  Friday, 20 June 2008 FiXed some bug in communication Inside have a universal RPL for erase all certificate in the phone. If you Want to erase all certificate in phone write rpl from this arhive

New version is available - 1.51.exe  Thursday, 19 June 2008 Changed backup to plaintext RPL format. Improved backup of simlock for new nokia models(added backup of field 120) Added support for APE certificates. Fixed search for model by name. Fixed Dejan Codes generation. Added unlock for 5000 rm-362 (will work min with 1.51.exe) -extract patch file to patch_files directory Some other small bug fixed

DB2020 inside v4.9  Wednesday, 18 June 2008 Whats new: - Added Unlock boot for DB2012 phones (no need for server for downgrade etc...) - Added new REST files for DB2020 phones - Added new reset files for DB2012, DB2020 and PNX phones ALL CIDs supported New files in installer: Repair files - Flash Via Unlocked Boot.act - Unlock Db2012 Boot.act Reset total call timer - DB2020 Reset Total Call Timer-allCIDs.ee - PNX Reset Flip Counter-allCIDs.ee - PNX Reset Total Call Timer-allCIDs.ee User lock - DB2020 Reset User Lock-allCIDs.act - PNX Reset User Lock-allCIDs.act Please check user manual page 35 for more details (DB2020 inside -> Help -> User manual) If you make any REST file which does not exist in installer please post it in this topic and we will include it in next installer:

New version is out - 1.50  Thursday, 12 June 2008 new in him is: N78 (RM-235) Usb flashing support. Use DEADPHONE flashing!!! flashing from powered mode, doesn't work with Phoenix for now

DB31xx inside v1.9  Friday, 6 June 2008 Whats new: - W890 and K660 PID list updated and extended - Added new model C702 - New flash files available on support area

MT-RED PRO 1.5.2.322 update  Thursday, 5 June 2008 What's new? -added automatic enable imei rebuild function via "UNLOCK" button for sagem based phones -flexible "imei rebuild" maintenance via INI files -some interface functionality changes -minor bug fixed -user manual updated

DB2020 inside v4.8  Wednesday, 4 June 2008 Whats new: - New PNX model W350 supported - Supported T280 (flash only). If you have locked phone for test please contact me by pm - DB2012 CID 53 supported use USB cable only - Added upgrade file for DB2012 CID51,52 to CID53.ee - Added new REST files for JAVA unlock method - Read phone software version by USB cable supported

MT Nokia 1.49 is out  Sunday, 25 May 2008 Fixed bugs from 1.48 no need server for reset BB5 counter. flashing E65 with new loaders via USB (old and new E65 supported). ini files fixed to work with new loaders. added 6300 v6.01 counter reset. now all models loaded in list box.

DB2020 inside v4.7  Thursday, 22 May 2008 Whats new: - Added new REST files for JAVA unlock method - Fixed K2xx boot problem - Added new models W380 and Z555 If you make any REST file which does not exist in installer please post it in this topic and we will include it in next installer:

New version- 1.48 setup is out!  Thursday, 22 May 2008 MTB_NK 1.48 Release: Added: some version for unlock bb5 phones. added few versions to reset counters bb5 phones. Fixed: fixed boot problem for dct4+ phones (some 1650). bugs fixed in BB5 USB flashing fixed flashing e65 (spain )

DB2020 inside v4.6  Monday, 19 May 2008 Whats new: - Added unlock without test point for PNX5230, DB2020 and DB21xx using JAVA unlock method - Allowed to customers to make rest files by it self and share with others News files in installer: - Install Unlocker-pnx5230finall.act - Install Unlocker-db2012finall.act - Install Unlocker-db2020finall.act - Make Unlocker Rest File-PNX5230.fs - Make Unlocker Rest File-DB2010.fs - Make Unlocker Rest File-db2020.fs Please before start read carefully user manual page 32,33 and 34 If you make any rest file which does not exist in installer please post it in this topic and we will include it in next installer:

DB2020 inside v4.5  Wednesday, 14 May 2008 Whats new: - Corrected T250 flashing bug - Added w200 restore GDFS option (please check user manual for more details) - Added option to repair damaged GDFS by upload GDFS from other w200 phone - Added repair all CRC after restore or write GDFS from other phone (just unlock phone after restore) Users who have installed "DB2020 inside v4.4.exe" can download and install "DB2020inside_v4.5_for_v4.4_users_only.exe" New users need to download full installation "DB2020 inside v4.5.exe"

DB2020 inside v4.3  Wednesday, 7 May 2008 Whats new: - Added support for unlock W200 CID 52 by test point - Added backup eeprom data, all files will be saved to DB2020 inside/backup folder New files in installer: - Test point picture for w200 (C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\Test Points\) - Test point cable scheme (C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\Documents\) - Test, Install and unlock files for W200 CID 52 (C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\TP Unlock\) - User manual updated Short manual how to unlock W200 CID 52 via Test Point - Start DB2020 inside v4.3 or higher - Select W200 from phone model list - Add to software ˇ°Test GT Boot-w200.pluginˇ± (found in DB2020 inside/TP Unlock folder ) to check it is GT boot already installed or not, if boot is already installed you does no need for a test point. - If GT boot does is not installed to the phone please add to software ˇ° Install GT Boot-w200.plugin ˇ± (found in DB2020 inside/TP Unlock folder) - Prepare phone for Test Point and connect it to box cable without battery - For this operation you need to have special cable (can bay it or modify your existing K750 cable) - The cable scheme you can find in DB2020 inside/Documents folder - Test Point picture are available in DB2020 inside/Test Points folder - On some phones CPU you will find GLUE, please scratch it very carefully only from 27 pin - Press Do It button and connect Test point when software tells you to CPU pin 27 - Disconnect Test Point when software tells you to - Please wait to software finish and The End message appears - Now you can assembly your phone and proceed to unlock process - Add to sofware ˇ°Unlock DB2012-W200.pluginˇ± file (found in DB2020 inside/TP Unlock folder) - Press Do It button - Wait to software finish - The phone will be unlocked and all codes will be set to 0000 0000 - Your phone eeprom backup will be saved to DB2020/backup folder Users who have installed DB2020 inside v4.2 can download and install "DB2020inside_v4.3_for_v4.2_users_only.exe" New users need to download full installation "DB2020 inside v4.3.exe"

DB2020 inside v4.4  Wednesday, 7 May 2008 Whats new: - Corrected bug when save GDFS files (please delete old *.BIN files, new files will be saved like *.GDFS) - Corected test point cable scheme (C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\Documents\MT-BOX_SE-TEST_POINT_CABLE.pdf) - Corected test point info for w200 (C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\Test Points\w200_tp) - Added cable K750 cable pictures before and after modify (C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\Documents\) Users who have installed DB2020 inside v4.3 can download and install "DB2020inside_v4.4_for_v4.3_users_only.exe" New users need to download full installation "DB2020 inside v4.4.exe"

DB31xx inside v1.8  Tuesday, 6 May 2008 Whats new: - W890 PID list updated and extended - Added new models K660 and Z770 - New flash files available on support area

DB2020 inside v4.2  Monday, 7 April 2008 Whats new: - Added support for flash CID 53 phones - Added upgrade CID 51 and CID 52 to CID 53 file - Added support to flash CID 52 phones with CID 53 firmware without to need upgrade phone CID to 53 - Added all in one step (unlock CID 52 phones by patch and upgrade firmware to CID 53), downgrade also possible after Users who have installed DB2020 inside v4.1 can download and install "DB2020inside_v4.2_for_v4.1_users_only.exe" New users need to download full installation "DB2020 inside v4.2.exe" The software can be used also with ALL upgraded MT box Siemens and MT box Nokia to MT box SonyEricsson. How to upgrade your MT box to MT box SonyEricsson unlimited Please note: Some CID 53 firmwares are available on support sites and some of them will be available ASAP

MTB NK v1.47  Monday, 7 April 2008 What's new: - Fixed USB n82 flashing - Added REPAIR IMEI DCT4+_NEW - Option:REPAIR IMEI DCT4+_NEW can be used with full access accounts only and is 5 credits

MT box RED - 1.5.0.297 ALPHA  Saturday, 5 April 2008 Whats new: - Added boot-recovery function for sagem based phones - Boot-recovery function is available only for SI-activated boxes and is absolutely free.

Mt-red Pro 1.5.0.297 ALPHA  Friday, 4 April 2008 What's new? The promissed update - added boot-recovery function for sagem based phones. Boot-recovery function is available only for SI-activated boxes and is absolutely free. Important: Strongly recomended to flash the phone after boot-recovery.

Mt-red Pro 1.4.6.293 BETA2  Wednesday, 2 April 2008 executable only - fixed problem with full rebuild security for SI activated boxes

Mt-red Pro 1.4.6.291 BETA  Tuesday, 1 April 2008 [1.4.6.291 BETA] -Added full support for ZTE A36 -Added LG KP100, KP105a, KP106b, MG160b -minor bug fixed

1.46_1.exe  Monday, 31 March 2008 fixed bug with usb flashing.

New files uploaded to support  Monday, 31 March 2008 KG270P16-07-V10e-XXX-XX-MAY-30-2007 Languages(EN, RU, UK, KK, LT, LV, ET) Upgrade/Repair pack //LG customization KG270P16-ARB-V10i-XXX-XX-DEC 13 2007 Languages(EN, AR, FA, UR) Upgrade pack //LG customization KG270P16-AFR-V10e-XXX-XX-SEP 03 2007 Languages(EN, FR, ES, PT, TR) Upgrade pack //LG customization LG KG275 KG275P16-EEU-V10f-XXX-XX-AUG-31-2007 Languages(EN, RO, HU, BG, HR, SR) Upgrade/Repair pack //LG customization KG275P16-ESA-V10i-XXX-XX SEP 21 2007 Languages(EN, ZH, TH, ID, MS, VI) Repair pack //LG customization KG275P16-FL-34-V10b-214-03 JUN 08 2007 Languages(EN, DE, ES, FR) Repair pack //ORANGE ES customization KG275P16-FL-34-V10a-208-10 JUN 22 2007 Languages(EN, NL, FR, IT) Repair pack //FR SFR customization KG275P16FL-33-V10b-208-01-CAF-SEP-07-2007+1 Languages(EN, DE, FR, IT, TR) Upgrade pack //CAF customization KG275P16-420-V10d-XXX-XX-AUG-08-2007 Languages(EN, DE, CS, RU, SK) Upgrade pack //LG customization LG KP100 KP100-00-V09a-EEU-XX-JAN-21-2008 Languages(EN, RO, HU, BG, HR, SR) Repair pack //LG customization LG KP105 KP105-00-V10b-AFR-XX-DEC-20-2007 Languages(EN, FR, ES, PT, TR, KO) Upgrade pack //LG customization Vodafone 227 VDF-P108B1B01-FrRoBg-BG02 Languages(FR, RO, BG) Upgrade pack //Vodafone customization ZTE A36 ES-PE-P108A8(Z)V1.0.0B02 Languages(EN, ES) Upgrade/Repair pack //CLARO customization ADDITIONAL Vodafone 225 Factory default settings Sagem my220X, Sagem my220V, Vodafone 226 Factory default settings LG KG270, KG275 Factory default settings

MT Box Nokia v1.46  Sunday, 30 March 2008 Content flashing (USB&FBUS) bug fixed for Nokia 8600. Added unlock files for DCT4+ 1200 - RH-99 v5.06 1208 - RH-105 v5.06 1650 - RM-308 v5.06 2310 - RM-189 v6.52 2610 - RH-86 v6.70 2626 - RM-291 v6.80 and some small bug fixed.

Symb inside v1.3a  Saturday, 29 March 2008 Whats new: - Added repair phone USB communication - Added repair for vibrating phones on start up - User manual updated Short manual how to repair phone USB communication If you got phone with vibrating problem on start up or not working USB communication you need to use this step to repair it: - Select phone model - Add “W950 Repair” file to software - Connect cable to box - Connect phone to box cable - Press Do It button - Wait to software finish - Disconnect phone - Now on your phone USB communication is working - Now you can flash your phone using USB cable if its necessary Video demo: Symbian inside repair USB communication and phone vibrating problem Users who have installed Symb inside v1.3 can download and install "Symb_inside_v1.3a.exe" New users need to download full installation "Symb_inside_v1.3.exe" then download and install "Symb_inside_v1.3a.exe" Symb inside software are FREE upgrade for all MT box SonyEricsson users. The software can be used with all MT box SonyEricsson and upgraded MT box Nokia to MT box SE. How to upgrade your MT box Nokia to MT box SonyEricsson unlimited

New files uploaded to support  Thursday, 27 March 2008 SAGEM MY220X, SAGEM MY220V, VODAFONE 226 EBI_IH_120707_1046___EBI_IH___120707_1046 Languages(EN, FR, RO, BG, HU, PL) Upgrade/Repair pack, EEPROM //Vodafone customization ECI_IE_010807_1653___ECI_IE___010807_1653 Languages(EN, FR, DE, IT, NL, TR) Upgrade/Repair pack, EEPROM //Sagem customization ECI_IF_080807_0957___ECI_IF___080807_0957 Languages(EN, FR, DE, IT, NL, TR) Upgrade/Repair pack, EEPROM //Virgine customization ECI_IF_080807_0957___ECI_IF___080807_0957 Languages(EN, FR, DE, IT, NL, TR) Upgrade/Repair pack, EEPROM //T-Mobile customization EBI_IQ_260907_1316___260907_1316___EBI_IQ Languages(EN, FR, TR, UKR, RU) Upgrade/Repair pack, EEPROM //Sagem customization SAGEM MY150X 091007_1225___EAI_IH___EAI_IH_091007_1225 Languages(EN, FR, DE, IT, NL, TR) Upgrade/Repair pack, EEPROM //Sagem customization EAI_ID_070807_1103___EAI_ID___070807_1103 Languages(EN, UKR, RU, TR) Upgrade/Repair pack, EEPROM //Sagem customization EAI_IC_300707_1408___300707_1408___EAI_IC Languages(EN, DE, TR) Upgrade/Repair pac,k EEPROM //Sagem customization.

2600c added  Wednesday, 26 March 2008 About mistake need to change patch file for rh-60 with this one. Added 2600classic for unlock -need to extract patch file in directory with patch files

Mt-red Pro 1.4.4.276  Wednesday, 26 March 2008 ************************** ** MT-RED Release notes ** ************************** [1.4.4.276] -Added full security support (Lock/Relock/IMEI/...) via GT Server for Sagem based phones with new MCU -Enabled LG flash option for boxes with SI activation -Enabled Sagem based phones flash option for boxes with SI activation SI ACTIVATED BOXES - GT SERVER BASED - Lock/Relock to custom NETWORK * Vodafone 125/225, * Sagem my150x, my220x, my220v - with new MCU * Vodafone 226 - with new MCU * Zte A35 - Rebuild IMEI after fullflash with data from other phone - Vodafone 125/225 * Vodafone 125/225, * Sagem my150x, my220x, my220v - with new MCU * Vodafone 226 - with new MCU * Zte A35 All star marked options (*) REQUIRE GT SERVER ACCOUNT. SI ACTIVATED BOXES - Free stuff. - Free Unlock Sagem based phones -My150X -My220X -My220V -Vodafone 226 - Flashing Sagem based phones -My150X -My220X -My220V -Vodafone 226 - Flashing LG phones (E-gold Voice based).

New Version FULL Installer 1.46 of MT-BOX NOKIA  Tuesday, 25 March 2008 MTB_NK 1.46 Release: Content flashing (USB&FBUS) bug fixed for Nokia 8600. Added unlock files for DCT4+ 1200 - RH-99 v5.06 1208 - RH-105 v5.06 1650 - RM-308 v5.06 2310 - RM-189 v6.52 2610 - RH-86 v6.70 2626 - RM-291 v6.80 and some small bug fixed.

Mt-red PRO 1.4.4.269  Monday, 24 March 2008 What's new? - Added free sagem unlock for SI activated boxes -added read usercode function for sagem my150X. vodafone 125 and ZTE A35 ************************** ** MT-RED Release notes ** ************************** [...] -Added Free unlock for boxes with SI activation -Added Vodafone 125 - read user code -Added Sagem my150X - read user code -Added ZTE A35 - read user code -Fixed bug Boot error 6/7

DB2020 inside v4.1  Sunday, 23 March 2008 Whats new: - Added support for new USB flash drivers - Added new USB flash drivers (C:\Program Files\GriffinTeam\MT SonyEricsson\DB2020 inside\USB flash driver new) Users who have installed DB2020 inside v4.0 can download and install "DB2020inside_v4.1_for_v4.0_users_only.exe" New users need to download full installation "DB2020 inside v4.1.exe" The software can be used with all MT box SonyEricsson and upgraded MT box Nokia to MT box SE. How to upgrade your MT box Nokia to MT box SonyEricsson unlimited.

Mt-red 1.4.4.246  Wednesday, 19 March 2008